Best Fluke Multimeter in 2022 : Top 10 Picks and Buying Guide

The fluke multimeter is a versatile tool that can be used for testing electrical circuits, checking capacitors and resistors for shorts or open circuits, measuring AC voltages and currents, and more. It also has features that make it a great choice for the DIYer.

For example: The built-in test leads allow you to easily connect the multimeter to an electricity source (such as a wall outlet) without having to remove any screws first. This makes it easy to check circuit connections quickly and accurately. Additionally, the digital display gives you accurate readings in both volts and amps at all times, so you can troubleshoot problems with ease.

Best Fluke Multimeter

If you’re in the market for a quality multimeter, there are few better choices than FUJI Fluke. Not only do they make some of the best multimeters on the market, but their customer service is also second to none.

1. Fluke 117 Electricians True RMS Multimeter

Fluke 117 Electricians True RMS Multimeter

The Fluke 117 is a versatile multimeter that will meet the needs of electricians and other professionals in the electrical industry. It has a wide range of features, including voltage detection technology for non-contact measurements.

This allows you to make accurate readings on sensitive circuitry without having to touch it or use any contact probes. The large white LED backlight makes working in poorly lit areas simple and easy. You can also rely on this unit to give accurate readings even when working under difficult conditions.

Another great feature of the Fluke 117 is its low input impedance which helps prevent false readings due to ghost voltage (distorted signals caused by noise). Additionally, it can measure DC millivolts up to 600 mV with accuracy down to 1 mV (resolution). And because it operates at temperatures ranging from -10°C upto 50°C, you can use it in almost any environment imaginable.

Lastly, true RMS measurement ensures that your measurements are always accurate and consistent no matter what type load you are measuring (linear or non-linear). Thanks to its battery life of 400 hours typical without backlight, this meter will be able not just keep up but exceed your expectations time after time.

Highlighted features:

  • VoltAlert technology
  • AutoVolt automatic AC/DC voltage selection
  • Large white LED backlight
  • True RMS for accurate measurements on non-linear loads
  • Operating temperature: -10°C to +50°C
Buy on Amazon

2. FLUKE-101 Digital Multimeter

FLUKE-101 Digital Multimeter

The Fluke-101 digital multimeter is designed for basic dc accuracy and Cat III 600 V safety ratings. It also has a diode and continuity test with buzzer, making it ideal for testing electrical systems.

It is small in size and lightweight, making it easy to carry around even when you are working on a large project. Its rugged design ensures long-term use without any issues. The meter features an autoranging function that will take care of the calibration process automatically once you have entered the correct voltage or current values into the unit’s memory bank.

This saves time, hassle, and energy expenditure in terms of having to do this manually each time you need to measure something specific relating to electricity measurements or tests thereof . Additionally, there is a backlight that makes it easier for you to read results at night or during low light conditions without straining your eyes too much

Highlighted features:

  • Basic dc accuracy of 0.5%
  • CAT III 600 V safety rated
  • Diode and continuity test with buzzer
  • Small lightweight design for one-handed use
  • Rugged, durable design
Buy on Amazon

3. Fluke 117/323 Kit Multimeter and Clamp Meter Electricians Combo Kit

Fluke 117/323 Kit Multimeter and Clamp Meter Electricians Combo Kit

Electricians who need to measure AC and DC voltages, amps and currents often have to carry around multiple devices. But with this Fluke 117/323 kit multimeter and clamp meter combo, that will no longer be the case.

The multimeter measures AC voltage as well as DC ampacity while the clamp meter measures AC voltage only . Both instruments are true RMS which ensures accurate readings on nonlinear loads. You won’t have to worry about false measurements due to ghost voltages either.

The input impedance of both these devices is low so there is little likelihood of false readings caused by electromagnetic interference (EMI). This makes it an ideal choice for measuring signals that exhibit high levels of EMI such as power lines or medical equipment etcetera In addition, the 117 multimeter also features low offset capacitance so you can make reliable measurements even in difficult environments like tight spaces or near metal objects etcetera The 323 clamp meter provides a true RMS AC current measurement along with VAC & DC voltage readings at 400A current capacity and 600Vac /DC voltage ratings respectively making it perfect for testing appliances like motors etcetera .

It has a long life too.

Highlighted features:

  • AC and DC voltage
  • AC and DC amps
  • true RMS for accurate measurements on non-linear loads
  • low input impedance which helps prevent false readings due to ghost voltage
  • measures 400 A AC current and 600 VAC and DC voltage
Buy on Amazon

4. Fluke 107 AC/DC Current Handheld Digital Multimeter by Fluke, Gray

Fluke 107 AC/DC Current Handheld Digital Multimeter by Fluke, Gray

Having a digital multimeter can help you save time and effort in many tasks. The Fluke 107 AC/DC Current Handheld Digital Multimeter is an excellent example of this.

It offers voltage, resistance, capacitance, continuity, and diode tests to 10 A current input terminals. You will also appreciate the backlit display that makes it easy to read even under low light conditions.

Plus, data hold ensures that you do not lose any important measurements during your work session. This meter has an auto ranging function as well as frequency and duty cycle measurements for accurate results in those areas too.

Additionally, it comes with protection against overcurrents and short circuits so that your equipment stays safe at all times

Highlighted features:

  • Data hold
  • Backlit display
  • Input terminal for AC and DC current measurements to 10 A and current
  • Data output
  • Diode test
Buy on Amazon

5. Fluke 115 Compact True-RMS Digital Multimeter

Fluke 115 Compact True-RMS Digital Multimeter

This Fluke 115 Compact True-RMS Digital Multimeter is a perfect tool for anyone who needs accurate measurements on nonlinear loads. It features CAT III 600 V safety rating and offers true-rms readings to ensure accuracy.

The large white LED backlight makes working in poorly lit areas easy and comfortable too. You can also check continuity, frequency, capacitance and diode test with this instrument easily. Another great feature of the multimeter is its ability to measure 20 A (30 seconds momentary; 10 A continuous).

That means you can handle even the most demanding tests with ease. Also, it has a compact design that will make it easy to carry around as well as store in small spaces

Highlighted features:

  • True-rms for accurate measurements
  • CAT III 600 V safety rated
  • Large white LED backlight to work in poorly lit areas
  • Operating Temperature -10 °C to + 50 °C Storage Temperature -40 °C to + 60 °C
  • Measures 20 A (30 seconds momentary; 10 A continuous)
Buy on Amazon

6. Fluke – Fluke-106 Esp Fluke-106 Palm-sized Digital Multimeter

Fluke - Fluke-106 Esp Fluke-106 Palm-sized Digital Multimeter

The Fluke-106 is a palm-sized digital multimeter that offers voltage, resistance, capacitance and current measurements. It can measure AC and DC currents to 10 A with accuracy and precision.

Data hold will keep the last measurement you made on screen until you exit the mode or power off the device. This instrument also has an input terminal for AC current measurements which makes it perfect for technicians who work with electrical systems in both indoor and outdoor environments.

The country of origin is China which may cause some concern among consumers but does not affect performance whatsoever according to reviewers online

Highlighted features:

  • Voltage, resistance, continuity, capacitance
  • Input terminal for AC and DC current measurements to 10 A
  • Data hold
  • Country of origin: China
Buy on Amazon

7. SSEYL FLUKE 17B+ Digital Multimeter F17B+

SSEYL FLUKE 17B+ Digital Multimeter F17B+

The Fluke 17B+ Digital multimeter is a powerful tool that offers multiple functions with Auto / Manual ranges. This makes it very versatile and perfect for various tasks.

It has a large LCD display that makes the readings easy to comprehend even at a distance. Additionally, this unit also boasts 4,000 counts update 3/sec which ensures accuracy and reliability of measurements.

Frequency measurement includes 50Hz,500Hz,5KHz,50KHz and 100Khz range while capacitance measures include 40uF/400uF/4uF/40UF/400UF/.1000uf range . Moreover,. 5% + 5 scale is offered too for added convenience in making calculations .

AC voltage (A-V-Ohm) and DC voltage (Ohm) can be measured simultaneously with 0dBm (+3 dB), 20dB(+6dBr), or 10log10(V). Capacitance measuring range is from 5pF to 1000pF while continuity test covers resistance up to 1Mohm (.001%). Note: The Fluke 17B+ Digital Multimeter is manufactured by the Chinese factory only; therefore warranty will not be valid in other countries

Highlighted features:

  • Auto / Manual range
  • Large LCD display
  • 4,000 counts update 3/sec
  • Main measurements: Frequency, Temperature, AC/DC A-V-Ohm , capacitance, Diode & Continuity , duty cycle test
  • Frequency: 50Hz–100Khz 、500Hz 、5KHz 、50.00KHz 、100Khz
Buy on Amazon

8. Fluke 1587/I400 FC 2-In-1 Insulation Multimeter With Clamp

Fluke 1587/I400 FC 2-In-1 Insulation Multimeter With Clamp

With its plethora of features, the Fluke 1587/I400 FC 2-In-1 Insulation Multimeter is perfect for any insulation or electrician job. It comes with a wide range of measurements that include Pl/DAR and TrendIt graphs.

The multimeter also offers temperature compensation through Fluke Connect Measurements app. This will ensure accurate readings in all conditions. You can use it to measure AC current up to 400 A AC with its 1 mA/Amp output accuracy guarantee.

Additionally, it has an onscreen display (OSD). So you don’t have to take your eyes off the workpiece while measuring current levels or voltage values. The multimeter is CAT III 1000 V / CAT IV 600 V overvoltage rated too which gives you added user protection against potential threats like lightning strikes and surges from power outlets etc..

Lastly, it even includes a Clamp function for easy measurement of currents above 1 A AC using the i400 AC Current Clamp accessory sold separately.

Highlighted features:

  • CAT III 1000 V / CAT IV 600 V overvoltage rating
  • Temperature Compensation through Fluke Connect Measurements app
  • 1 mA/Amp output guarantees easy reading
  • Pl/DAR measurements with TrendIt graphs
Buy on Amazon

9. Fluke – Fluke-1587 FC Fluke 1587 FC 2-In-1 Insulation Multimeter

Fluke - Fluke-1587 FC Fluke 1587 FC 2-In-1 Insulation Multimeter

There are a lot of insulation meters on the market today, but none come close to what Fluke has offered with their 1587 FC Insulation Multimeter. This is because it offers some unique features that no other meter does.

One of the most important ones is PI/DAR (polarity index/dielectric absorption ratio). With this feature, you can quickly identify problems with your insulation. The trend graphs make it even easier for you to track and understand how your insulation is performing over time.

Another great thing about this meter is its memory storage capabilities through the mobile Fluke Connect Measurements App. That means you won’t have to write down every single result or measurement anymore – which will save you a lot of time and effort in the long run. Additionally, temperature compensation helps establish accurate baselines and relevant historical comparisons between different samples or test points..

And if there’s ever any issue with your instrument, the low pass filter will automatically discharge capacitive voltage so that it doesn’t damage your equipment further

Highlighted features:

  • Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000V
  • Temperature Compensation through App
  • PI (polarity index) /DAR (dielectric absorption ratio) with Trend It graphs
Buy on Amazon

10. Fluke 87V Digital Multimeter with a NIST-Traceable Calibration Certificate with Data

Fluke 87V Digital Multimeter with a NIST-Traceable Calibration Certificate with Data

With this Fluke 87V Digital Multimeter, you can measure voltage and resistance with great accuracy. It also comes equipped with a nist-traceable calibration certificate that guarantees the instrument meets manufacturer’s specifications.

The multimeter is capable of measuring up to 10 amps and 20 amps for up to 30 seconds each time. This makes it ideal for testing electrical systems in homes or small businesses. The unit has an input filter option that allows you to select which ranges are displayed on the screen.

This will ensure accurate readings across all types of inputs – whether they be AC or DC voltages. There are also audible alerts provided when incorrect measurements are made using the input jacks, thereby preventing any damage from happening inadvertently. You can store data files automatically after each measurement so that you can track your progress over time easily.

Highlighted features:

  • nist-traceable calibration certificate
  • Measure up to 10 a, 20 a for up to 30 seconds
  • Selectable filter for accurate voltage
  • Input alerts provides audible warning against wrong use of input jacks
Buy on Amazon

What to Look for to Have The Best Fluke Multimeter?

Every now and then we all need to check for the overall health of the device we are using. It’s a good idea to check your multimeter from time to time to ensure it is working well.

Power

The power of the unit is one of the most important factors in ensuring that the multimeter is working at its best. You don’t want to have to reach for a new battery every time it runs out of juice.

Voltage Range

The voltage range is the amount of voltage the multimeter can handle. The higher the range, the more accurate the readings you get. You can check the range by pressing the test button on the multimeter.

Accuracy

How accurate are the readings? The accuracy of the multimeter is another important factor. The ability to read off the voltage perfectly is one of the best indicators of the accuracy of the instrument.

Accuracy of the readings

Some multimeters may have a very high accuracy rate, while others may have a very low one. It’s important to check what the accuracy of the instrument is, so that you can make a decision on whether you want a high-accuracy or high-precision instrument.

Frequency Response

A frequency response is a measurement of the amount of range the multimeter can cover. The wider the range, the greater the accuracy.

Features to Consider

Features like LED indicators, dual function, and auto-ranging are some of the most important ones to consider. These features make the multimeter much more reliable and easy to use.

Battery Life

A multimeter that has long battery life is an important consideration. You want to make sure that the battery lasts for a long time.

What People Also Asking About Best Fluke Multimeter?

A fluke multimeter is one of the best tools to help you conduct electrical tests. You can use a fluke multimeter to help you determine the voltage, current, and resistance of your device. Below, you can find your best fluke multimeter and other helpful hints on how to use this tool.

Q: What is the best fluke multimeter?

A: The best fluke multimeter is a hand-held device that offers you the ability to do electrical tests. With a fluke multimeter, you will be able to test the voltage, current and resistance of your device. Make sure you get a fluke multimeter that is suitable for your purpose and the type of device you are testing.

Q: What are some benefits of fluke multimeter?

A: When you have a fluke multimeter, you can test the voltage, current, and resistance of your device. You can use your fluke multimeter to test the voltage, current, and resistance of the following devices: home appliances, power tools, and other devices. The main benefit of fluke multimeter is that it helps you conduct electrical tests.

Q: What is the best way to use a fluke multimeter?

A: Use your fluke multimeter to measure voltage. The best way to use your fluke multimeter to measure voltage is to make sure you have your meter in contact with the test points of your device. Use your multimeter to measure the voltage, then you can calculate the resistance.

Q: How can I know the resistance of my device?

A: The resistance of your device will vary depending on the type of material it is made out of. For instance, if you are using an appliance made out of plastic, the resistance will be much lower than one made out of copper. You can use your fluke multimeter to check the resistance of your device.

Q: How can I conduct an electrical test?

A: Conducting an electrical test is very simple. You only need to make sure you are in contact with the test points of your device. Check the voltage first, then check the current.

Q: How can I use a fluke multimeter?

A: When you are conducting an electrical test, make sure you are in contact with the test points on your device.

Conclusion

If you are looking for a quality multimeter that is both accurate and affordable, the FUJI Multimeter FL-VM22E may be the perfect option for you. This meter features an intuitive interface and comes with a variety of measuring capabilities, making it ideal for use in a range of applications.

Leave a Comment